Heads up to anyone who drives through Liberty County: A major route through there was shut down in both directions. According to the Texas Department of Transportation, TxDOT, the U.S. 90 bridge at ...

Bending 1/2-in. EMT isn't hard, but it takes finesse. You'll need a specialty tool called a conduit bender to make the 90-degree angles necessary to turn corners or change directions. Or you can ...

Description: STANDARD RADIUS TYPE ALUMINUM MATERIAL UL 6, CSA C22.2, UL (CANADA AND US), ETL APPROVAL ANSI C80.5 APPLICABLE STANDARD 10 PER CARTON STANDARD PACKAGE 2 INCH TRADE SIZE EXTERNAL THREADED ...

Fig. 3. Conductors cannot be attached to a mast between a weatherhead or end of the conduit and a coupling if the coupling is above the last conduit support — or if the coupling is above the building.

U-type clamps are generally used when the conduit (pipes though which electrical power cables can be run) needs to be installed perpendicular to the beam. Bend type clamps, such as U-type, are not ...

The answer comes down to friction. Friction is our enemy here, putting a limit to how much we can physically bend the conduit before it becomes too difficult to move. But the specific relationship ...

Four zebras were on the run Sunday afternoon just off Interstate 90 by North Bend, according to Washington State Patrol spokesperson Trooper Rick Johnson. As of Sunday evening, two had been ...

One of our writers tested the $600 Dyson Airwrap and its rival the Shark FlexStyle, which is half of the price of its ...

Courtesy of www.MikeHolt.com. Based on the 2023 NEC. Question: Grounding electrode conductors smaller than _____ shall be protected in rigid metal conduit, IMC, PVC conduit, electrical metallic tubing ...

Search efforts are intensifying for a runaway zebra in North Bend after three others were captured over the weekend. It's one of four zebras that got loose on I-90 near exit 32 while being ...

Washington State Patrol Trooper Rick Johnson said four zebras got loose when a driver stopped to secure a trailer on eastbound I-90 near the North Bend exit while heading to Montana Sunday afternoon.